EZ Dupe 1 to 9 NVMe Cyclone Pro 300 - M.2 PCie NVMe / M2 SATA SSD & Hard Drive Duplicator & Sanitizer 18GB/Min

Mounts for M.2 NVMe and Rack for SATA Hard Drives 

The NVMe Cyclone Pro offers different setup and configurations for the SATA Hard Drives. The Rack can be adjusted and setup.  Ideal and created for utilizing space in your duplication area as there is a divider for each slot.

The duplicator can be lower for parallel mount to the M.2 NVMe flatbed area or the rack can be raised higher in a tower formation.

Bi-Directional Duplication between M.2 NVMe and SATA Hard Drives 

Bi-Directional Crossover duplication can be accessed between the different interface of SATA hard drive disks (HDD) to M.2 NVMe, or vice versa.

The NVMe Cyclone Pro automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:

• M.2 (SATA) to M.2 (NVMe)
• M.2 (NVMe) to HDD/SSD (SATA)
• HDD/SSD (SATA) to M.2 (NVMe)
• HDD/SSD (SATA) to HDD/SSD (SATA)

M.2 NVMe / M.2 SATA SSD connections

The NVMe duplication area can be inserted on the flatbed mount area of the duplicator. 22mm sized module of B-Key, M-Key, and B+M Key are all accepted. The length size of 2230, 2242, 2260, and 2280 keys can be inserted on each of the designated area with rubber stopper on the bottom for the longest key to prevent over-insertion.

Daisy-Chain Cyclone Pro 

Daisy Chain your NVMe Cyclone Pro to another NVMe Cyclone Pro!

Important Note: You can connect multiple NVMe Cyclone Pro together to increase the amount of the duplication copies at the same time from one source slot of the duplicator. Daisy-Chain up to maximum of 128 NVMe Cyclone Pro 600 together from one source to max slot copies of  2294.

Please note in that it needs to be in same models (ie NVMe Cyclone Pro 300 to NVMe Cyclone Pro 300.... or NVMe Cyclone Pro 600 to NVMe Cyclone Pro 600). It cannot mix different speed of NVMe Cyclone Pro.

Downloadable Event Log File

Download the Event Log File to one drive for the detailed information of the completed function. The event log file would include the detailed type of job function, time/stamp of the completed job function, and the Identification number of the drive.

Purchase the Log File Printer to connect the NVMe Cyclone Pro to get the printed detail events of each job function. (Coming soon)

Quality Check

Check for bad sector, storage capacity or speed. Use this enhanced function to determine if the M.2 NVMe modules are in optimal condition for your installation.

H3 Read Test
H5 Read/Write Test
H6 Cyclic Unused Area Write/Read Test
H7 Fake Card Test

9 Testing Criteria

• Test range
• Bad sector ratio
• Read speed threshold
• Write speed threshold
• Storage Size Capacity threshold
• Format type
• Power off times
• Power off duration
• Execution cycles

4 Testing Results

• Bad sector quantity
• Tested capacity
• Average read speed
• Average write speed

Whole media copy - Comprehensive (Full Copy)

System and Files Copy – Intelligent Copy (Quick Copy) 

System and Files Copy copies only stored system and files data, not unused space area. Intelligent Copies that duplicates essential files in the M.2 NVMe drives to save time.

Example: Partition 1 has a capacity of 158GB with 58GB of data in it. Only 58GB of data will be copied while unused space area will not be copied. 

All Partitioned Copy - Copy Partitioned Area Only 

Example: a 600GB M.2 NVMe has two partitions.

Partition 1 with 158GB and Partition 2 with 200GB. While All Partition Copy mode is selected, these two partitions will be copied and the undefined area will not be copied

Percentage Copy - Setting up a starting point and end point

When the file system of a M.2 NVMe drive is undefined, Percentage Copy can be used by setting up the ending point of data to copy from the starting point of 0%.

Non-Zero Copy - Excludes "zero"data area for proprietary sytems

For unknown or proprietary systems, Non-Zero Copy mode can be utilize to exclude "zero" data area for rapid and efficient copy for M.2 modules that contain proprietary system files such as SGI, BOS, and many other different operating systems.

Quick Erase - Essential Files

Full erase - Entire Drive

Erase the data from a M.2 NVMe module by overwriting each sector which is able to read/write data.

3-Pass DoD

Erase M.2 NVMe module 3 times complying with the 5220.22-M data erase security standard of the U.S. Department of Defense.

7-Pass DoD

Erase M.2 NVMe module 7 times complying with the 5220.22-M ECE data erase security standard of the U.S. Department of Defense to ensure the data is unable to be recovered.

Secure Erase 

The Secure Erase Mode is approved by N.I.S.T. (National Institute of Standard Technology) SP 800-88 for data sanitization solution that most lessens the risk to confidentiality while respecting any other constraints involved.

Enhanced SSD Erase 

The Enhance SSD Erase Mode is approved by N.IS.T. for overwriting predetermined data patterns, data area including sectors that are no longer in use due to allocation. It erases data by using internal M.2 SSD's built-in ATA command.

Erase HPA area 

Remove the HPA (Hidden Partition Area) and free up space

Erase DCO area 

Remove the DCO (Device Configuration Overlay) partition